| Interface | 1* 10/100Mbps Ethernet WAN Port (Passive PoE In) 1* 10/100Mbps Ethernet LAN Port 1* Reset Button 1* F(Function) Button 1* S(Setting) Button |
| Power Supply | Passive Power over Ethernet through WAN Port, or DC Jack In (12V 1A) |
| LED Indicator | Power, LAN, WAN, Master/Slave, Wi-Fi Channel |
| Antenna Type | Built-in 11dBi High Performance Panel Antenna Beam Width: 60o |
| Enclosure | Outdoor IP65 Dust-tight Water-Resistant Protection |
| Wireless Standards | IEEEE 802.11 ac/an/a |
| Frequency | 5GHz AC |
| Data Rate | Up to 450Mbps |
| Transmit Power | Up to 20dBm Note: maximum transmission power may vary across different countries subject to local regulatory and regions in which the device is used |
| Transmission Distance | Up to 1Km (in Wireless Bridge mode) * |
| TDMA Support | Yes |
| Multiple SSID Support | Up to 4 Multiple SSID |
| Physical Wi-Fi Channel Configuration | Configurable through F(Function) and S(Setting) buttons in the device |
| Physical Master/Slave Configuration | Configurable through F(Function) and S(Setting) buttons in the device (only for Wireless Bridge/WDS mode) |
| Wi-Fi Analyser | Supported |
| Wireless Configurations | 5GHz a/an/ac modes Automatic / Static Channel Selection Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption SSID Broadcast Enable/Disable Multi-SSID Wireless MAC Address Filter |
| Operation Mode | Wireless Bridge/WDS, Gateway, Wi-Fi Repeater, Wireless AP |
| WAN Connection Type | Dynamic IP, Static IP, PPPoE |
| Management | Web-based http management (local / remote) Device discoverable through PROLiNK Wireless Controller (when WAN mode is set to get DHCP from AC) System Log |
| System Tools | Run-time Wireless Traffic Connection Rate Wireless Analyser Connected Clients information |
| Dimension | 168 x 88 x 57.6 mm |
| Weight | 235g |
| OS Supported | Microsoft Windows 7/10 MAC 10.6 and above Linux |
| Outdoor Wireless Bridge CPE/AP Ethernet Cable Quick Installation Guide 24V 0.5A Passive POE Injector Mounting Kit |
.png)
